MOVECAT C1 VARIO

MOVECAT C1 VARIO

  • €6.000,00
    Einzelpreis pro 
  • Du sparst €700


VMC variable motion chain hoist (formerly VMK-S) acc. DGUV V17 (formerly BGV C1), DIN 56950-1:2012-05, EN 61508-SIL3
- 125 - 2500 kg *
- 0 - 40m/min //  0 - 666mm/sec *
- closed-loop-system: continuously variable speed from zero to maximum
and change of direction without any interruption
- true zero speed 
- prepared for group-operation 
- continuous power transmission without any overload safety clutch
- inbuilt status board, LED illumination of the working status
- inbuilt test device concerning DGUV V17/BGV C1 and DIN 56950 for independent check of the work and over travel switches + independent brake test
- braking system with two independent silence, noise-optimized DC brakes
- independent gap/function control devices
- TÜV/BGV C1 approved, 4-pole limit and over travel switch gear box
- 2-channel high resolution incremental encoder on the motor shaft
- 29-bit high resolution absolute encoder on the chain pocket wheel
- integrated dynamic load cell (DMS) with load check device (no lost of installation height)
- motor thermal limit device (self-resetting)
- designed for usage with frequency converters / V-Motion module 
- 1,5 m PMC HV connecting cable (all in one) with rugged bending protection and a PMC C8/24 hybrid multi-pin connector prepared for use with MOVECAT V-Motion
- protection level IP 54
- chain 5,2x 15 / 7x21 / 7.4x22 / 9x27 / 11x31 (2.7 kg/m), DIN 5684 *
- chain length needs extended to 1.4m for proper configuration of limit switches in addition to travel height
- fixed chain bag in black 
- standard application
- basic plate
- 2 handles
- rotating chain ring eye (instead of chain hook)

SERVICE:

- Preliminary, final and handover inspection in accordance with DGUV V17/BGV C1 and VDE 0701/0702

PLEASE NOTE:
A separate inspection by an external expert according to BGG 912 done as acceptance inspection for a point hoist or the alternative as pre-examination, design and construction test for use with /or integration to manned airframes for people are additional and necessary inspections!

- conformity: CE-Certification*
- new: full integrated overload protection & lifetime monitoring & diagnostic report*
 (more information)  *

* according your final product configuration

Technical data:
- model: SB2/13D     40 m/min // 125kg  //  5.2 x 15  discontinued*
- model: SK030/77   10 m/min // 300kg // 5.4 x 15
- model: SB4.2/14M 33 m/min // 250kg //   7 x 22  discontinued*
- model: SK070/19   33-40m/min // 125-250kg // 7 x 22 *
- model: SK070/13   15 m/min // 500kg //   7 x 22 * 
- model: SB6.1/12P  24 m/min // 500kg //   9 x 31  discontinued*
- model: SB6.1/        30 m/min // 500kg // 7.4 x 22 *
- model: SB8.3/10V 10m-12m/min // 1000 - 2500 kg  //  11x31 *

- single fall / double fall*
- FEM D8: 2M/M5
- ED: 40%
- switches: 150 S/h
- outlet hybrid connector: side, brake side
- housing gear side not closed
- motor power: 0.80 - 3.60 kW *

(pictures might differ from original product)